Making Trellis Wall for Evergreen Vine
Trellis wall is a wonderfull idea for decorating your garden, because it can become a home for the evergreen vine! The trellis wall can be wonderfull shield for privacy and serve as a great decor in general.
DIY Trellis Wall
Trellis walls apart from being the home for the evergreen vines, can become a great accenting tool for the entryways, shields for creating some privacy places within the garden, and other purposes! You can even make one yourself, and for this project you will need: 2 2×4 inch post, narrow wood slats or 1/2×1 inch lumber, wood glue, hammer, nails, hand saw.
Before you will start you will need to prepare the area for the trellis wall. Think of the size your trellis wall will be, and the thickness of the lumber, usually under five feet tall and wide. Cut the 2x4s posts to the desired height, and remember that one foot would be in the ground. It is important to lay the support posts parallel to each other, and then mark the place where the posts will go underground. Now, arrange the slats across the two support posts at a 45 degree angle, working only in one direction, using glue attach them in place. When finished start with the other side to create the lattice effect. It is important to secure with nail gun or hammer. Cut off the excessice timber using saw and your trellis wall is done!
Incoming search terms:
- diy trellis for vines
- Diy vine wall
- evergreen trellis
- evergreen vines for trellis
- good diy trellis for honeysuckle vine